排名聚合算法在少量长列表聚合中的性能比较分析

排名聚合将多个排名列表聚合成一个综合排名列表,可应用于推荐系统、链路预测、元搜索、提案评选等.当前已有工作从不同角度对不同排名聚合算法进行了综述、比较,但存在算法种类较少、数据统计特性不清晰、评价指标不够合理等局限性.不同排名聚合算法在提出时均声称优于已有算法,但是用于比较的方法不同,测试的数据不同,应用的场景不同,因此何种算法最能适应某一任务在很多情况下仍不甚清楚.本文基于Mallows模型,提出一套生成统计特性可控的不同类型的排名列表的算法,使用一个可应用于不同类型排名列表的通用评价指标,介绍9种排名聚合算法以及它们在聚合少量长列表时的表现.结果发现启发式方法虽然简单,但是在排名列表相似度较高、列表相对简单的情况下,能够接近甚至超过一些优化类方法的结果;列表中平局数量的增长会降低聚合排名的一致性并增加波动;列表数量的增加对聚合效果的影响呈现非单调性.整体而言,基于距离优化的分支定界方法 (FAST)优于其他各类算法,在不同类型的排名列表中表现非常稳定,能够很好地完成少量长列表的排名聚合.     

Surface passivation in n-type silicon and its application in silicon drift detector

Based on the surface passivation of n-type silicon in a silicon drift detector(SDD), we propose a new passivation structure of SiO2/Al2O3/SiO2 passivation stacks. Since the SiO2 formed by the nitric-acid-oxidation-of-silicon(NAOS)method has good compactness and simple process, the first layer film is formed by the NAOS method. The Al2O3 film is also introduced into the passivation stacks owing to exceptional advantages such as good interface characteristic and simple process. In addition, for requirements of thickness and deposition temperature, the third layer of the SiO2 film is deposited by plasma enhanced chemical vapor deposition(PECVD). The deposition of the SiO2 film by PECVD is a low-temperature process and has a high deposition rate, which causes little damage to the device and makes the SiO2 film very suitable for serving as the third passivation layer. The passivation approach of stacks can saturate dangling bonds at the interface between stacks and the silicon substrate, and provide positive charge to optimize the field passivation of the n-type substrate.The passivation method ultimately achieves a good combination of chemical and field passivations. Experimental results show that with the passivation structure of SiO2/Al2O3/SiO2, the final minority carrier lifetime reaches 5223 μs at injection of 5×10¹⁵ cm^-3. When it is applied to the passivation of SDD, the leakage current is reduced to the order of nA.     

射流对绕水翼云空化流动抑制机理研究

为理解绕水翼云空化流动的发展机理和探究水翼吸力面开孔射流的影响,采用密度 修正的RNG $k$-$\varepsilon $湍流模型和Schnerr-Sauer空化模型对原始NACA66(mod) 水翼和采用射流后的 水翼的云空化非定常过程进行模拟和对比分析;采用在水翼吸力面近壁区设立监测线的方法对近壁区的流场进行监测,得到 近壁区汽相体积分数、回射流速度、压力及压力梯度的时空分布云图;开展了云空化流场特性的涡动力学分析,进而分析水 翼云空化的发生机理和射流抑制空化的抑制机理. 结果表明:游离型空泡在下游溃灭时产生强烈的局部高压,其向上游传播 导致前缘空穴的一次回缩,而空穴的二次回缩受回射流的影响. 回射流的发展区域受限于较高的压力梯度,高的压力梯度一 直存在,但回射流在一个周期内的首次出现需要时间的积累. 在水翼吸力面射流使得射流孔附近压力升高,弥补了由于空化 和绕流造成的压降,压力梯度增大,抗逆压能力增强,对回射流起到阻挡作用;另一方面,射流使得回射流区域面积和回射 流的强度也有所减小,从而对云空化的发展起到抑制的效果. $Q$准则的涡结构云图相比于汽相体积分数云图能显示复杂的 流动结构,前缘附着型空穴和尾缘游离型空穴内存在旋涡,回射流对空穴存在剪切作用造成空穴脱落. 而射流对空穴和回射 流的剪切和阻挡使云空化发展得到抑制.      

基于多基因遗传规划的储层岩石静态模量预测

声发射技术作为一种动态无损检测手段,主要实现对材料产生的缺陷进行动态监测及损伤位置的预测。微机电系统声发射传感器在检测材料疲劳裂纹位置和扩展方向上应用广泛,实现其对材料裂纹的3-D动态位移检测,对于无损检测技术的发展具有重要意义。该文提出了一种新型3-D微机电系统声发射传感器,首先对3-D微机电系统声发射传感器进行了结构设计和性能分析,结构方面主要包括z方向响应传感单元和x、y方向响应传感单元设计;其次通过传感器的阻尼、谐振点处灵敏度计算,证明传感器的性能良好;最后采用有限元软件ANSYS对z方向响应传感单元做了模态和谐响应分析,x、y方向响应传感单元做了模态分析和谐响应分析,仿真结果与理论值吻合较好,验证了结构设计的合理性,对实现材料裂纹的三维动态检测具有一定的参考意义。     

基于局部加密纯无网格法非线性Cahn-Hilliard方程的模拟

为数值求解描述不同物质间相位分离现象的高阶非线性Cahn-Hilliard(C-H)方程,发展了一种基于局部加密纯无网格有限点集法(local refinement finite pointset method,LR-FPM).其构造过程为:1)将C-H方程中四阶导数降阶为两个二阶导数,连续应用基于Taylor展开和加权最小二乘法的FPM离散空间导数;2)对区域进行局部加密和采用五次样条核函数以提高数值精度;3)局部线性方程组求解中准确施加含高阶导数Neumann边值条件.随后,运用LR-FPM求解有解析解的一维/二维C-H方程,分析粒子均匀分布/非均匀分布以及局部粒子加密情况的误差和收敛阶,展示了LR-FPM较网格类算法在非均匀布点情况下的优点.最后,采用LR-FPM对无解析解的一维/二维C-H方程进行了数值预测,并与有限差分结果相比较.数值结果表明,LR-FPM方法具有较高的数值精度和收敛阶,比有限差分法更易数值实现,能够准确展现不同类型材料间相位分离非线性扩散现象随时间的演化过程.     

Ion-Functionalized Silver(I) Carboxylates: Synthesis and Application in Ru-Catalyzed Olefin Metathesis Reaction

Russian Journal of General Chemistry - The Grubbs–Hoveyda catalysts have a wide range of applications in catalyzed formation of the carbon-carbon double bonds. In this study, several...     

Thermal Decomposition Kinetics of Ginkgo biloba Leaves Polyprenol in Nitrogen Atmosphere

The nonisothermal decomposition kinetics of Ginkgo biloba leaves polyprenol (GBP) and cleaved situation of its chemical bond during thermal decomposition process were first investigated using thermogravimetric (TG) and TG‐FTIR technology. The results of thermal decomposition kinetics revealed that the nonisothermal decomposition mechanism of GBP corresponds to first‐order chemical reaction with n = 1, integral form g(a) = –ln(1 – a) and differential form f(a) = 1 – a. TG‐FTIR results demonstrated that absorbance of –CH₃, unsaturated C–H bond, =CH₂, accumulated C=C, –OH, and so on constantly increased with thermal decomposition reaction went on. In addition, storage life of GBP was also evaluated. These data could provide theoretical guidance for purification under high temperature and other thermal application of GBP.     

Alcohol/water-soluble porphyrins as cathode interlayers in high-performance polymer solar cells

Three alcohol/water-soluble porphyrins,Zn-TPy PMe I:zinc(II)meso-tetra(N-methyl-4-pyridyl)porphyrin tetra-iodide,ZnTPy PAd Br:zinc(II)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide and Mn Cl-TPy PAd Br:manganese(III)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide were employed as cathode interlayers to fabricate polymer solar cells(PSCs).The PC71BM([6,6]-phenyl C71 butyric acid methyl ester)and PCDTBT(poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)])-blend films were used as active layers in polymer solar cells(PSCs).The PSCs with alcohol/water-soluble porphyrins interlayer showed obviously higher power conversion efficiency(PCE)than those without interlayers.The highest PCE,6.86%,was achieved for the device with Mn ClTPy PAd Br as an interlayer.Ultraviolet photoemission spectroscopic(UPS),carrier mobility,atomic force microscopy(AFM)and contact angle( )characterizations demonstrated that the porphyrin molecules can result in the formation of interfacial dipole layer between active layer and cathode.The interfacial dipole layer can obviously improve the open-circuit voltage(Voc)and charge extraction,and sequentially lead to the increase of PCE.